|
L. Bain & Co Ltd WORKBOATS AND SHIPPING SERVICES
|
|
The M.B Avante underway
The M.B. Avante is our 32ft steel workboat, currently used for Hydrographical survey work, personnel transfer, light towage and general mooring duties. It is powered by a 180Hp Gardner that gives the boat a free running speed of 6 knots. She underwent refurbishment in 2006 and has benefited by the installation of a 4 KVA generator. The faithful member of the fleet has returned after a mechanical refit. She has had her Gardner 6LXB engine and gearbox completely rebuilt along with new stern gear. She was re-launched on Saturday 25th February 2006 and was run round to Gravesend to enter service Monday morning. Her First job was a survey of Tate & Lyles, Silvertown. Dimensions
HullLOA: 9.8m (32') BOA: 3.7m (12') Draft: 1.1m (3' 6") Cabin2.9m x 2.1m (9' 6" x 7') Can seat 6 people. Aft Deck3.5m x3.2m (11' 6" x 10' 6")
Engine and Electrics
Gardner 6LXB 180HP (rebuilt 2006)
4 x 12V (1000amps) Batteries providing 12V and 24V circuits. 4 KVA Kipor Generator
Equipment
VHF Transducer 210 KHZ Raytheon GPS Cabin Heater Echo sounder Full safety equipment
Layout
Licensed to carry 12 people by the Port of London Authority On the Water
Avante on the Pier Avante Ashore
Avante when New!
Key Benefits
If you would like any further information or a viewing of this vessel please contact us through the office number (below) or email: info@thamesworkboats.co.uk
|
Contact info:Office: 01634 290488 Mobile (24Hrs): 07973 303442 Fax: 01474 363025 Email: info@thamesworkboats.co.uk If you are experiencing any problems with this website
please contact
R.
Bain
|
Contact info:Office: 01634 290488 Mobile (24Hrs): 07973 303442 Fax: 01474 363025 Email: info@thamesworkboats.co.uk If you are experiencing any problems with this website
please contact
R.
Bain
|